Equipment Inspection and Preparation: Before operating, ensure that all parts of the equipment are normal, including the connection of power, air, cooling water, etc. Wear appropriate personal protective equipment, such as safety helmets, goggles, earplugs, gloves, etc.

Start the Equipment: Turn on the power switch and wait for the power indicator light to come on. Start the cutting machine's motor or engine until it enters a normal operating state.

Select Cutting Conditions: According to the type and requirements of the material, select the appropriate cutting tools, adjust the cutting speed and depth, and set the feed speed.

Load Material: Place the material flat on the worktable and secure it with appropriate tools to ensure the material is stable during the cutting process.

Configure Machine Settings: Adjust the laser power and cutting speed according to the thickness and type of material. Make adjustments for focus distance and alignment to ensure the laser beam is focused on the material surface.

Run Test Cut: Perform a test cut to verify if the settings are appropriate, check the cutting quality, and adjust the settings if necessary according to the test results.

Execute Final Cut: Cut under monitoring, check the equipment's operating status in real-time, handle any abnormal situations, and check the cutting quality after cutting.

Maintenance and Care: Regularly clean and inspect the equipment, including cleaning fans, cleaning lenses, guide rail cleaning, tightening screws and couplings, and checking the light path.

Safe Operation: During the operation process, follow all safety guidelines. It is strictly forbidden to use broken grinding wheels, prevent sparks from splashing, and stay away from flammable and explosive materials.

Environmental Control: When using in high-temperature environments, pay attention to avoiding condensation. Regularly check and maintain the cooling system, use regular distilled water or purified water, and clean the scale in the water tank.

Using and maintaining the CUT-OFF MACHINE correctly can not only improve work efficiency and product quality but also extend the service life of the equipment and reduce maintenance costs.